F500 anchor accounts · verified roster
25 marquee operators across 21 countries trust VB Engineering.
P&ID, Isometric, Single-Line Diagrams, General Arrangement, and full plant documentation packages. LiDAR-powered for accuracy. Productized for repeatability. 3,000+ km of P&ID delivered across refineries, petrochem, steel plants, pharma, and data centres.
VB Engineering delivers LiDAR-powered As-Built drawings from Hyderabad HQ and Houston/Katy CAD teams. P&ID per ISA S5.1, Isometric piping per ISO 6428, Single-Line Diagrams per IEEE Std 315, General Arrangement + Plant Layout, and the full documentation package. Native AutoCAD + SmartPlant + MicroStation workflow. Native handover to Wistwin for digital twin platform ingestion. 3,000+ km of P&ID delivered across 21 countries.
As-Built Engineering discipline · across 21 countries · CEng MIE signed.
As-Built Engineering runs the international standards stack with country-native regulatory overlays applied per jurisdiction.
Instrumentation symbols + identification per ISA S5.1. Diagram for process plants per ISO 10628. Industry-standard P&ID workflow.
Technical drawings for piping isometrics per ISO 6428. Dimensioning + tolerancing per ASME Y14.5. SmartPlant / AutoCAD Plant 3D workflow.
Graphic symbols for electrical and electronics diagrams per IEEE Std 315. IEC 60617 for international hand-over. Single-line + power distribution diagrams.
General principles of presentation per ISO 128. Drawing scales per ISO 5455. Plant layout + equipment arrangement workflow.
Native CAD workflow. AutoCAD .dwg primary deliverable. SmartPlant for refinery / petrochem. MicroStation for legacy ENPC engineering hand-overs.
Chartered Engineer signature on drawing technical accuracy. CAD Lead sign-off on standards compliance + drawing-set completeness.
The As-Built Engineering discipline broken into distinct deliverables. Productized for repeatability across 21-country footprint.
ISA S5.1 + ISO 10628 P&ID creation from LiDAR scan + existing reference. Process equipment + instrumentation + piping + control loops. Native AutoCAD .dwg deliverable.
ISO 6428 + ASME Y14.5 isometric piping drawings. Spool sheets for fabrication. Material take-off + bill of materials. SmartPlant / AutoCAD Plant 3D workflow.
IEEE Std 315 + IEC 60617 electrical single-line diagrams. Power distribution from incoming HV through LV distribution. Cross-walked with PSS load flow study deliverable.
ISO 128 + ISO 5455 general arrangement + plant layout drawings. Equipment positioning. Piping routing. Walkway + access. Hazardous-area boundaries marked.
All 4 drawing types as one bundle. Native Wistwin handover. Recommended for greenfield + brownfield major retrofit. Single Principal Reviewer signature across the full set.
Real engagements from the As-Built Engineering practice · F500 anchor accounts · CEng / PE signed.
Full P&ID + Isometric piping package across the FCC + Crude + Hydrotreater units. LiDAR-powered (Leica RTC360 captures registered in Cyclone REGISTER 360). 250+ km P&ID delivered. PE Texas + CAD Lead signature.
Plant-wide As-Built rebuild · P&ID + Iso + SLD + GA across coke oven, sinter, blast furnace, oxygen plant, and rolling mill. CEng MIE + CAD Lead signature. Native Wistwin handover.
Cleanroom As-Built P&ID + SLD across sterile fill-line. ISA S5.1 compliant. US FDA + EU EMA inspection compatible drawing-set. CEng MIE + CAD Lead signature.
Country-native As-Built Engineering pages with jurisdiction-specific standards, regulators, and case studies. Pick your geography.
Traditional As-Built relies on field measurement + sketch + redraw, which introduces 5-15% dimensional error and takes 3-5x longer. LiDAR-powered As-Built starts from a survey-grade point cloud (1.9 mm @ 10 m), then drawings are extracted within Cyclone + AutoCAD / SmartPlant. Faster, more accurate, with permanent baseline preserved.
Native AutoCAD .dwg as primary deliverable. SmartPlant for refinery + petrochem workflows. MicroStation for legacy ENPC hand-overs. Custom format on request. All drawing sets structured for native Wistwin platform ingestion.
Single P&ID drawing: 1-2 days from registered point cloud. Plant-wide P&ID + Iso package: 8-16 weeks. Full plant documentation rebuild (P&ID + Iso + SLD + GA): 16-32 weeks. Joint scoping within 72 hours.
Yes. Most-common bundle. LiDAR + As-Built single-engagement pricing on request. Continuous CEng + CAD Lead oversight from field capture through drawing-set sign-off. Single Principal Reviewer signature.
Drawing-set structured for native Wistwin platform ingestion. Tag-asset hierarchy mapped to digital twin object model. P&ID → process flow object. SLD → power distribution object. GA → spatial reference. Continuous synchronisation supported.
Tell us what you need · a named Chartered Engineer responds within 24 hours.